Casing System
UMB Casing Advance System
We are making a better future a reality. Quality and reliability are our main focus.
UMB Easy Lock
“High speed straight drilling in a wide range of ground conditions”
UMB EASY LOCK SYSTEM is designed with a male key on the pilot bit and a female key on the ring bit for a more consistent fit.
- Easy locking system to unlock and re-lock for flushing out cuttings.
- Cuttings will not stay in female key



Hole straightness
Various Systems and Models
The ULTRA MAXBIT casing systems/models are available for a variety of applications. Check out the table below for the range of casing sizes and use for each casing system/model.

| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
Single Pass Model ![]() |
Thread | Soft ground Shallow hole | Permanent | Piling Construction |
Normal Model ![]() |
Thread | Heavy duty Deep Hole | Permanent | Piling Construction Water Well / Geothermal |
Multi Use Model ![]() |
Inter Linked | Re-Using | Retrievable / Temporary | Anchoring, Foundation |
| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
| Single Pass Model |
Inter Linked | Larger Bore Drilling |
Permanent | Water Well / Geothermal |
| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
| Single Pass Model |
Thread | Small Hole Funneling |
Permanent | Piling Construction |
Hole straightness
Venturi Model
The VENTURI MODEL provides a variety of advantages and solution for sensitive ground drilling:
- The flushing air does not hit directly to the bottom of the borehole.
- Minimal air leakage into the formation to eliminate enlarging borehole.
- The reverse flushing causes a vacuum effect to remove the cuttings.
- Face groove designed by CAE simulation and analysis for more efficient flushing.
- Standard and Big Bore systems are available.


Specifications
Technical tables
| Casing Pipe | Type |
Ring Bit |
Pilot Bit | Ring Set (Ring Bit & Casing Shoe) | Compatible Part |
System Part Number |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Outer Dia. |
WallMax. Thickness |
Model |
Inner Dia. |
Outer Dia. |
Outer Dia. |
Hammer | Weight (kg) |
Weight (kg) |
|||
| D2 | D4 | D1 | D3 | ||||||||
| CASING PIPE ø89.1mm (3 1/2″) | |||||||||||
| 89.1 (3 1/2″) |
6.3 (0.25″) |
056D | Single pass | 56 | 100 | 74 | DHD065 | 5.0 | 2.7 | US056D-02-R-266 | |
| 2.20″ | 3.94″ | 2.91″ | |||||||||
| 7.0 (0.28″) |
059W | Multi use | 59 | 99 | 73 | DHD065 | 5.0 | 2.4 | UM059W-02-R-240 | ||
| 2.32″ | 3.90″ | 2.87″ | |||||||||
| CASING PIPE ø114.3mm (4 1/2″) | |||||||||||
| 114.3 (4 1/2″) |
10.0 (0.39″) |
072A | Single pass | 72 | 126 | 92 | DHD3.5 | 8.5 | 4.7 | US072A-03-BB-004 US072A-03-R-035 |
|
| COP34 | 9.1 | ||||||||||
| 2.83″ | 4.96″ | 3.62″ | |||||||||
| COP32 | 8.5 | ||||||||||
| 072A | Normal | 72 | 126 | 92 | DHD3.5 | 8.5 | 4.7 | UN072A-03-BB-005 UN072A-03-R-077 |
|||
| COP34 | 9.1 | ||||||||||
| 2.83″ | 4.96″ | 3.62″ | |||||||||
| COP32 | 8.5 | ||||||||||
| 072W | Multi use | 72 | 122 | 92 | DHD3.5 | 8.5 | 4.4 | 072A Pilot bit | UM072W-03-R-285 | ||
| COP34 | 9.1 | ||||||||||
| 2.83″ | 4.80″ | 3.62″ | |||||||||
| COP32 | 8.5 | ||||||||||
| 8.0 (0.31″) |
072B | Single pass | 72 | 126 | 95.5 | DHD3.5 | 8.7 | 4.8 | US072B-03-R-090 | ||
| COP34 | 9.3 | ||||||||||
| 2.83″ | 4.96″ | 3.76″ | |||||||||
| COP32 | 8.7 | ||||||||||
| 072B | Normal | 72 | 126 | 95.5 | DHD3.5 | 8.7 | 4.8 | 072A Ring bit | UN072B-03-R-368 | ||
| COP34 | 9.3 | ||||||||||
| 2.83″ | 4.96″ | 3.76″ | |||||||||
| COP32 | 8.7 | ||||||||||
| 072X | Multi use | 72 | 122 | 95.5 | DHD3.5 | 8.7 | 4.6 | 072B Pilot bit | UM072X-03-R-369 | ||
| COP34 | 9.3 | ||||||||||
| 2.83″ | 4.80″ | 3.76″ | |||||||||
| COP32 | 8.7 | ||||||||||
| 6.5 (0.26″) |
078W | Multi use | 78 | 124 | 98 | DHD3.5 | 9.5 | 3.9 | UM078W-03-R-239 | ||
| COP34 | 10.1 | ||||||||||
| 3.07″ | 4.88″ | 3.86″ | |||||||||
| COP32 | 9.5 | ||||||||||
| 6.35 (0.25″) |
080A | Single pass | 80 | 124 | 99.5 | DHD3.5 | 9.7 | 3.9 | US080A-03-R-341 | ||
| COP34 | 10.3 | ||||||||||
| 3.15″ | 4.88″ | 3.92″ | |||||||||
| COP32 | 9.7 | ||||||||||
| 080A | Normal | 80 | 124 | 99.5 | DHD3.5 | 9.7 | 4.0 | UN080A-03-R-249 | |||
| COP34 | 10.3 | ||||||||||
| 3.15″ | 4.88″ | 3.92″ | |||||||||
| COP32 | 9.7 | ||||||||||
| 080W | Multi use | 80 | 128 | 99.5 | DHD3.5 | 9.7 | 4.5 | 080A Pilot bit | UM080W-03-R-371 | ||
| COP34 | 10.3 | ||||||||||
| 3.15″ | 5.04″ | 3.92″ | |||||||||
| COP32 | 9.7 | ||||||||||
| 6.0 (0.24″) |
082A | Single pass | 82 | 126 | 100 | DHD3.5 | 10.1 | 3.8 | US082A-03-R-372 | ||
| COP34 | 10.7 | ||||||||||
| 3.23″ | 4.96″ | 3.94″ | |||||||||
| COP32 | 10.1 | ||||||||||
| 082A | Normal | 82 | 126 | 100 | DHD3.5 | 10.1 | 3.9 | UN082A-03-R-373 | |||
| COP34 | 10.7 | ||||||||||
| 3.23″ | 4.96″ | 3.94″ | |||||||||
| COP32 | 10.1 | ||||||||||
| 082W | Multi use | 82 | 128 | 100 | DHD3.5 | 10.1 | 4.5 | 082A Pilot bit | UM082W-03-R-342 | ||
| COP34 | 10.7 | ||||||||||
| 3.23″ | 5.04″ | 3.94″ | |||||||||
| COP32 | 10.1 | ||||||||||






