Like to know more?
¿Quieres saber más?
Speak to the experts in the field
Hablar con los expertos en el campo.
NEW TOOLS
NUEVAS HERRAMIENTAS
We are making a better
future a reality
Estamos haciendo realidad un
futuro mejor
Quality and reliability are our main focus
La calidad y la fiabilidad son nuestro principal objetivo.
SMB-G – Super Max Bit G-Model
SMB-G – Super Max Bit G-Model
has better extending and retracting reliability with fewer performance troubles do to simultaneous wing bits support
Tiene mejor confiabilidad de extensión y retracción con menos problemas de rendimiento debido al soporte simultáneo de piezas de ala.
SMB-G – Super Max Bit G-Model
SMB-G – Super Max Bit G-Model
has better extending and retracting reliability with fewer performance troubles do to simultaneous wing bits support
Tiene mejor confiabilidad de extensión y retracción con menos problemas de rendimiento debido al soporte simultáneo de piezas de ala.
Hole Straightness
Various Systems and Models
Rectitud del pozo
Varios sistemas y modelos
The ULTRA MAXBIT casing systems/models are available for a variety of applications. Check out the table below for the range of casing sizes and use for each casing system/model.
Los sistemas/modelos de carcasa ULTRA MAXBIT están disponibles para diversas aplicaciones. Consulte la tabla a continuación para ver la gama de tamaños de carcasa y el uso de cada sistema/modelo.
| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
Single Pass Model  |
Thread | Soft ground Shallow hole | Permanent | Piling Construction |
Normal Model  |
Thread | Heavy duty Deep Hole | Permanent | Piling Construction Water Well / Geothermal |
Multi Use Model  |
Inter Linked | Re-Using | Retrievable / Temporary | Anchoring, Foundation |
| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
Single Pass Model  |
Inter Linked | Larger Bore Drilling |
Permanent | Water Well / Geothermal |
| Standard DTH System Model | Connection | Suitable for | Casing Type | Application |
|---|---|---|---|---|
Single Pass Model  |
Thread | Small Hole Funneling |
Permanent | Piling Construction |
Hole Straightness
Venturi Model
Rectitud del Pozo
Modelo Venturi
The VENTURI MODEL provides a variety of advantages and solution for sensitive ground drilling:
- The flushing air does not hit directly to the bottom of the borehole.
- Minimal air leakage into the formation to eliminate enlarging borehole.
- The reverse flushing causes a vacuum effect to remove the cuttings.
- Face groove designed by CAE simulation and analysis for more efficient flushing.
- Standard and Big Bore systems are available.
El MODELO VENTURI ofrece diversas ventajas y soluciones para la perforación en terrenos sensibles:
- El aire de barrido no impacta directamente el fondo del pozo.
- Mínimas fugas de aire hacia la formación, lo que evita la dilatación del pozo.
- El barrido inverso genera un efecto de vacío para eliminar los recortes.
- Ranura frontal diseñada mediante simulación y análisis CAE para un barrido más eficiente.
- Disponibles sistemas estándar y de gran diámetro.
| Products | Thread | Diameter | Length | Weight | Part number |
|---|---|---|---|---|---|
| mm | mm | in | |||
 |
R28 | 45 | 187 | 1.7 | HL300-45R28-187 |
 |
R38 | 45 | 500 | 5.4 | HL300-45R28-187 |
| T38 | 45 | 550 | 5.9 | HL500-45T38-550 | |
| T45 | 45 | 550 | 6.2 | HL500-45T45-550 | |
| R38 | 38 | 460 | 4.1 | HL500-38R38-460 | |
| T38 | 38 | 460 | 4.1 | HL500-38T38-460 | |
| T38 | 38 | 550 | 4.3 | HL500-38T38-550 | |
| R32 | 38 | 460 | 3.9 | HL500-38R32-460 | |
 |
R32 | 45 | 600 | 5.8 | HL600-45R32-600 |
| R38 | 45 | 525 | 5.6 | HL600-45R38-525 | |
| T38 | 45 | 525 | 5.6 | HL600-45T38-525 | |
| T38 | 45 | 600 | 6.0 | HL600-45T38-600 | |
| T45 | 45 | 525 | 5.8 | HL600-45T45-525 | |
| T45 | 45 | 600 | 6.4 | HL600-45T45-600 |